Jurassic Tools here:-- https://www.jurass...
Selling small Engineering tools to Modelmakers and Engineers alike.
Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look.
Several thousand items available. Hope you find something of interest.
...
Want to help us fund the site and time spent by the people behind it then use the button below.
We are not a registered charity so you can't claim it back but it helps pay for the costs of running the site and improving the features.
You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.
We have 47 adverts and 10 completed so far in April 2024 39 For sale adverts and of these 8 have sold. 3 Wanted adverts and of these none found what they needed. 3 Information adverts and 2 Thank you posts.
Last approved: Tuesday 23rd April 2024 at 1:48 Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking
Jurassic Tools here:-- https://www.jurassictools.com/
Selling small Engineering tools to Modelmakers and Engineers alike.
Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look.
Several thousand items available. Hope you find something of interest.
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/
Selling small Engineering tools to Modelmakers and Engineers alike.
Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look.
Several thousand items available. Hope you find something of interest.
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/
Selling small Engineering tools to Modelmakers and Engineers alike.
Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look.
Several thousand items available. Hope you find something of interest.
Read more...
Details: Large selection of threaded bar/Studding Metric sizes. Material Steel. Mainly M8 and M10 some M16. Over 120 metres approximately Getting in the way now so priced very low to sell (£20). Yes, everything in pics for this price. Longest length 3 metres, so vehicle needs to accommodate this, as collection only, From BH20 Dorset Sorry, i cannot cut this into manageable lengths, or sell individually.
Terms: Price: £25.00 Collection Only
Contact: Trader Tony English Wareham BH20 UK 01929 473901
Tools & Parts (Small tooling) Excellent State (Well maintained)
Details: Bison 3704-100 4 Jaw Plain Back self centring scroll chuck 100mm. In excellent condition with inside and outside jaws (matching numbers) and key. Backplates for this chuck can be obtained for Myford lathes and many others from Beaufort Ink (Versachuck is the same fitting). Can be sent Royal Mail Tracked 48.
Terms: Price: £135.00 Postage: £7.00 Collection or Royal Mail
Tools & Parts (Small tooling) Used (Correct working)
Details: Selection of Refrigeration tools all in good order, All good makes. Includes very good quality Imperial Eastman flaring tool, ratchet valve spanners,flare nut spanners. Must go as they remind me of work and I hope never to see an industrial chiller again! Postage is by Evri signed for and insured.
Terms: Price: £35.00 Courier: £6.50 Collection or Courier/Delivery
Contact: Dave Wootton Folkestone CT20 UK 07902 894154
Details: Here we have three fobco drill press thumb screws, The black coloured one is not to specification same diameter different knurl and no bevel side. The other two are to fobco specifications and an excellent knurl with the plain steel finish with bevel side as they did when they were made from the factory. These are not genuine fobco thumb screws. These are made to fobco specification. I only have three of these so buy one before they are all gone. £14.99 each are the plain steel the black one £9.99.
Terms: Price: £11.99 Postage: £2.00 Royal Mail Only
Contact: Keith Scourse cardiff CF23 UK 07873513885
Tools & Parts (Small tooling) Excellent State (Well maintained)
Details: Vehicle wiring tools all very little used and in good order,left over from my classic bike days, consists of Bullet crimping tool, gives a hexagonal crimp. Bullet closing tool Hellerman sleeve expanding tool Large crimps for battery terminals Cable cutters Post by Evri fully insured and signed for. Also includes a useful little selection of bullets,sleeves and uninsulated terminals. Phone or email contact no texts please.
Terms: Price: £40.00 Courier: £7.00 Collection or Courier/Delivery
Contact: Dave Wootton Folkestone CT20 UK 07902 894154
Tools & Parts (Small tooling) Used (Correct working)
Details: A vintage used engineers tool-chest or draw cabinet. Renewed green felt to the all the draws and slide front. dimensions approx. 18" x 12" x 7.5". Collection welcome or can send via courier. £120 or near offer.
Terms: Price: £120.00 Courier: £14.00 Collection or Courier/Delivery
Details: Precision electric hacksaw. One of its kind with full ball bearings mounted in the driving arm at each end. Will cut up to two inches plus, but maybe more suited for the home workshop. Overall length is just over 36 inches, A bit of a ‘brute’ as it weighs in at around 30 kilos! Sensitive dash pot allows blade to descend as slow as you wish. Showing cutting ( on utube video) exceedingly hard tempered bolt of 3/8ths inch diameter. Cutting time of approximately one minute. Powered by Hoover 1/6th horse power 240 volt motor with manual stop/ start belt tensioner. The blade in the machine is a normal hacksaw blade and not totally sharp and I expect that an industrial blade would cut quicker! Although have never had any problems with the standard d.i.y. ones. The belts could be guarded if you wish although quite relaxing watching them when in operation. You should be able to see this working if you go to utube and tap in- ‘Precision electric powered hacksaw 001’ Also would be ideal for displays at steam fairs or traction engines rally’s etc and will work fine from a small generator of around 850 watts output.
Terms: Price: £130.00 Collection Only
Contact: Jon Whitehead Dursley, Gloucestershire GL11 UK 01453 546575
Machines (Large Tooling) Excellent State (Well maintained)
Details: Precision electric hacksaw. One of its kind with full ball bearings mounted in the driving arm at each end. Will cut up to two inches plus, but maybe more suited for the home workshop. Overall length is just over 36 inches, A bit of a ‘brute’ as it weighs in at around 30 kilos! Sensitive dash pot allows blade to descend as slow as you wish. Showing cutting ( on utube video) exceedingly hard tempered bolt of 3/8ths inch diameter. Cutting time of approximately one minute. Powered by Hoover 1/6th horse power 240 volt motor with manual stop/ start belt tensioner. The blade in the machine is a normal hacksaw blade and not totally sharp and I expect that an industrial blade would cut quicker! Although have never had any problems with the standard d.i.y. ones. The belts could be guarded if you wish although quite relaxing watching them when in operation. You should be able to see this working if you go to utube and tap in- ‘Precision electric powered hacksaw 001’ Also would be ideal for displays at steam fairs or traction engines rally’s etc and will work fine from a small generator of around 850 watts output.
Terms: Price: £130.00 Collection Only
Contact: Jon Whitehead Dursley, Gloucestershire. GL11 UK
Details: A cast iron surface plate .18 inches square. Complete with a wooden cover. This is a heavy bit of work so strictly collection only please. No pallets or couriers.
Details: GEC/Alpak 3 phase electric motor 920 rpm. foot /flange mounting. can be wired in star or delta so may be used with a speed controller. bought for a now abanoned project. Ideal for a larger shaping machine. Collection only please,no pallets or couriers.
Details: A brand new still in box 2.5cc RC car engine. Comes complete with recoil pull starter, air filter, air filter oil and glow plug. Brand is Traxxas TRX 2.5. Retail price around £140.00. Only £65.00 Can be collected just north of Bristol
Terms: Price: £65.00 Courier: Free Collection or Courier/Delivery
Details: Photo 1 a.Toolrest 1-(Blue)-12" with 1-7/8" Shank:£8. b. Toolrest 2-Steel-48mm x 17mm:£6. c. Tool Height Indicator (British Indicator Ltd, St Albans):£10. Photo 2 a. Unknown early Swiveling Top/Cross-side Assembly Top/Travel=7-7/8"; Cross/Travel=7".'V' slot is 2-1/4" :£12. b.Toolrest Assembly-9"x2" Bed; Blade-4-1/2":£6. Photo 3 a. Reversed views of above parts.(More photos on request. Postage by cheapest way possible
Terms: Price: Multiple Collection, Courier/Delivery or Royal Mail
Contact: Richard Bartholomew Thetford IP26 UK 01366728030
Details: A good used vintage Abwood swivelling milling vice with 4.25" wide jaws, and 2.75" opening. The swivel base is approx. 9.5" x 6.5" and total height 4.5". A little too small for my Bridgeport hence sale Needs a good clean, the staining you see is not rust its veg oil I used as MQL I've now changed to coconut oil. Complete with cast steel Abwood crank handle. Collection if you wish or I’m happy to package and courier, you can arrange your own courier if you prefer or can find one cheaper. Weight approx 23Kg.
Terms: Price: £135.00 Courier: £25.00 Collection or Courier/Delivery
Tools & Parts (Small tooling) Used (Correct working)
Details: A good used vintage Abwood swivelling milling vice with 45/8" wide jaws, and 3" opening. The swivel base is approx. 11" x 8" and total height 5" inc. Complete with cast steel crank handle. Collection welcome and preferred, may be able to send via courier. Weight 23Kg.
Terms: Price: £160.00 Courier: £16.00 Collection or Courier/Delivery
Details: I am clearing a late friend's workshop. I have found a piece of 110mm bar, it is labled Titanium and from its appearance and the fact I can pick it up with one hand I an confident of the description, it is not stainless steel. It has a feint number 00/06789 in felt-tip on the end but this does not correspond with any listed alloy that I can find. It is 250mm long x 110mm dia - excepting one end which has been reduced to 108mm dia and it weighs approximately 10Kg. i was grossly missinformed, the scrap yaerd buy in value is £1/Kg obvioulsy the new buy value will be many times that so if anyone can make use of it for say £25 I am happy to send it.
Terms: Price: £20.00 Postage: £10.00 Courier/Delivery Only
Contact: Peter Watkinson Chard TA20 UK 01460 67320
Details: Neodymium magnets. Very strong. Size. 6mm diameter x 4mm thick. Grade N42 Quantity 100 Useful for all sorts of projects, Fridge magnets to science projects. Free post
Terms: Price: £10.00 Royal Mail Only
Contact: Richard Chadwick Nottingham NG15 UK 07967364447
Details: 3 and a bit off, one is missing end cap. The chap who gave them to me said they were runners, but not seen by me. Long through bolts holding the end caps on missing. Heavy so collect only
Terms: Price: Free Collection Only
Contact: Duncan Webster warrington wa4 UK 01925262525
Details: 1. Old 4-Jaw 5" Chuck, heavy but working. Opens to hold nearly 6", and has a 3/4" Threaded Bore -£5 2. Clamp 4" £2 3. Revolving Center, Morse No2-£5 4. Leeds "kingfisher" Grease Lubricators x2, 3/8 Thread -£4pair 5. Brass Grease Lubricatorsx25/16 Thread £3pair 6. Single Brass Grease Lubricator 3/8" thread -£2 7. Gib or Tailstock spanner, 1/4" £2 8. Vintage Tapholder £/16" to 3/8" by 11-1/2" long -£3 9. Twin Knurling Tool, J.H. Williams Drop Forged -£4 Postage by cheapest way depending on weight,(the Chuck would be £8.50)
Terms: Price: Multiple Collection, Courier/Delivery or Royal Mail
Contact: Richard Bartholomew Thetford IP26 UK 01366728030
Details: This is an as new Myford cabinet drip/chip tray I purchase some time ago which I need to move on as part of my thinning out. Its just sitting there gathering dust and should be going to good use. Contact Peter for further info etc, thanks for looking.
Terms: Price: £60.00 Collection Only
Contact: Peter Calvert Leyland/Preston PR25 UK +441772421405 07931880677
Details: For sale, Warco WM240 lathe. Selling due to father's bereavement. Originally purchased from Warren Machine Tools in Chiddingfold, Surrey in 2008. Lathe has been used for small home projects such as spacers, air rifle parts and turning various hobby equipment. Has been well maintained and comes with a variety of additional parts. Listed below are what we believe they are (from invoices or what it says on the box but can be seen in photos as well, we can provide more upon request). - Centre drill set 1/8" 3/16" 1/4" 5/16" 7/16" - Live centre -2MT - Drill Chuck B16 - 1-13MM - 2MT Arbor B16 - HSS Lathe Tool Set 8 Piece 12MM - Box with various equipment (spanners, chuck pieces) - Spring pins - Spare flywheel - Metal/plastic rods - Basic Mag Base - Transfer Punch Sets - Operators Handbook and various lathe literature. Collection only from Sheffield S8. Cash on collection.
Terms: Price: £1,100.00 Collection Only
Contact: Zak Ollerenshaw Sheffield S8 UK 07749524739
Details: This is a set of five (why five, I don't know - I would have expected an even number!) dummy leaf springs, cast in aluminium. Before anyone asks, I've no idea what model they're for - you'll have to simply look at the photos and decide for yourself. Overall width is just under 31/2", height just over 11/4" and 1/2" thick. There are a couple of holes at the ends for mounting. Any questions - just ask!
Terms: Price: £15.00 Postage: Free Collection or Royal Mail
Contact: Simon Oldfield Nawton YO62 UK 01439771818
Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.
By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.
We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.
In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.
We do not sell, hire, share or give out your email address.
The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.
So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new and repeat visitors. It does not have any detail on who you are.
Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.
All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.
This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales.
For Sale
