All Ads

We have 17 adverts and none completed so far in June 2026
14 For sale adverts and of these none have sold.
3 Wanted adverts and of these none found what they needed.
no Information adverts and no Thank you posts.

Last approved: Sunday 7th June 2026 at 0:54
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Details:
Boxford BUD MK3 / 5” Centre Height Metal Lathe For Spares !!
Lathe has following spares :
Cabinet , Bed , End Cover , Headstock , Saddle , Apron and Leadscrew
Cross Slide and Top Slide , Top and Bottom Motor Brackets
Dials are in Metric
Please Note : No Motor , No Half Nuts , No Gear Quadrant and Gears
Selling Lathe as Spares only ( Will Not sell Individual Bits )
Can be Secured on a Pallet For Delivery by Tail Lift Wagon

Details:
For sale are two steel indexing plates of nominal dimensions 126mm OD, 28mm ID, 3 holes on PCD 21mm of 6mm OD.
Both in good used but not abused condition. Number of holes as per photos.
Must be useful for someone other than the scrap-man.
Free postage.

Details:
this is a freestanding Tool and Cutter Grinder with a 3 phase motor currently converted to single phase but could easily convert back .
Ideal for sharpening end mills , slot drills and drill . last job was tapered drills 7 degree for an archer

Details:
A mix of 16-off Kennametal and Bristol-Erickson DA100 series collets.
15-off metric as follows:
4.4mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm, 8.5mm, 9.0mm, 10.0mm, 10.5mm, 11.5mm, 12.0mm, 12.5mm, 13.0mm, 13.5mm and 14.0mm
Plus one ¹/₄" collet.
All are in excellent condition. Many are brand new and unused.
I didn't realise I still had these as I let all my DA chucks and collets go several years ago. Probably not very widely used these days, but a shame to scrap them if someone can make use of them.
Will post at cost.

Details:
Fully reconditioned, including all new belts and new main bearing and spindle sourced from Derek Pyatt (acknowledged authority on these vintage machines and supplier of spare parts).
Also includes nearly all of the available attachments for this versatile machine, including rise-and-fall saw table and wobble saw adaptor, combination table, planer table and associated thicknessing attachment (planer blades recently reground), tilting sanding table and sanding disc, 6 inch face plate, speed reduction countershaft for large diameter outboard turning, a number of centres and tool rests/banjos, several chucks etc etc and lots of spares and a copy of the original manual.
Rewired with modern NVR switch and comes with its own purpose-built bench.
This is the early pattern machine, manufactured in 1962, but is nonetheless a good, reliable machine. However, I need the space for a newly acquired Harrison Graduate lathe and I have only really used the table saw and planer so much of its functionality is somewhat redundant to me.
Priced for a quick sale. £75 ono
Collection only due to size and weight

Details:
This is a boxed set of BSW taps and dies - in ¹/₁₆" increments from ¹/₈" to ¹/₂" diameter. There are two taps and a die for each size, plus a tap-wrench and a die stock. All contained in a tin box, with a plastic insert and plasic cover (to keep everything in place).
They don't appear to have been used much (I suspect that the majority are unused).
There's no makers name anywhere that I can see - so they're probably from the far east, and the quality's not brilliant (the dies are solid, for instance, not split) - so I would suggest that (particularly the larger sizes) they're probably more use for cleaning up damaged threads rather than cutting new, but it's a useful set to have 'on standby' when the odd one is needed.

Details:
This saw is 110 volts with 230 volts transformer

Details:
Refurbished Clarkson MkII Tool & Cutter Grinder, converted to 240V single-phase with DOL starter. Very well equipped with a wide range of original Clarkson tooling, holders, centres, tooth rests and wheel hubs. Clean, complete and ready for use. Comes with a lot of original Clarkson tooling and grinding wheels, too much to include in the photos

Details:
Brook Gryphon 1425 rpm single phase capacitor start ⁵/₈” shaft.
Will ship at cost, it’s quite heavy.

Details:
33T and 34T change wheels for Myford ML7/S7 lathes.
Allows metric threads to be cut on imperial lathes with thread cutting gear box. I made a pair for my lathe and while set up I made some spares. I'm selling these for £18 a pair inclusive of postage.

Details:
Stored unused item, so as new. Just a fair old bit cheaper than any others on Ebay, etc!!

Details:
Kerry AG lathe.c/w 3 and 4 jaws faceplate fixed and travelling steadies. 230 v 1 phase electrics.
Located in my garage on a large driveway it can be rolled out onto driveway and ready for lifting onto trailer or tailgate lift truck.
collection in person only please. no couriers or palletts. cash on collection please.

Details:
Bench lathe 1907 looks complete,missing tool tray,spindle does not have a taper for collets just a plain bore,somewhere along the line possibly its had a newly made spindle,turns smooth , no chucks just a small backplate,hand turning rest,bore is .538 registre thread 1.186 so 1&3/16 x 8 tpi.

Details:
Hi All, my friend is selling two small lathes of which one is a Harrison L5. Purchased from a school about... 12 years ago, it has sat in his spare unit till now. He had intended to use it but got a long contract that needed a Triumph so that's what he used all these years. So this is an opportunity to buy an ex-school Harrison in 'as removed' condition. We can load on site. If phoning me, SMS me first. I have "unknown caller blocking" active so I need to whitelist your number before you can call me.

Details:
Hi All, my friend is selling two small lathes of which one is a Bantam. Purchased from a school about... 12 years ago, it has sat in his spare unit till now. He had intended to use it but got a long contract that needed a Triumph so that's what he used all these years. So this is an opportunity to buy an ex-school Bantam in 'as removed' condition. We can load on site. If phoning me, SMS me first. I have "unknown caller blocking" active so I need to whitelist your number before you can call me.

Details:
Old school Medding drill from 1950s very heavy the likes of will never be made again replaced spindle bearings new belt nice chuck will hold a ¹/₁₆" drill runs smooth with original motor and starter a little bit of apprentice handy work on table but it is 60 years old happy to do a deal for it against a swivel tool grinding work support bracket ,the drill will break into two parts for transportation.