Trade Adverts

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the details…
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
Jurassic Tools here:-- https://www.jurass... Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest. ...
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea. Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details. ...
Read more...
Home Workshop

defaultAll Adsrss

We have 75 adverts and 14 completed so far in December 2018
49 For sale adverts and of these 13 have sold.
17 Wanted adverts and of these 1 found what they needed.
5 Information adverts and 3 Thank you posts.


Last approved: Sunday 16th December 2018 at 2:01
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Thank You: For all who responded to the advert a big thanks

Sat 15th Dec '18

Advert ID: 34324

Details:
Advert Number: 34295
Universal Dividing Head
Contact:
Geoff

For Sale: 12" dia Rotary Table

Sat 15th Dec '18

Advert ID: 34323

Tools
Details:
This is a Vertical and Horizontal Rotary table that i no longer have a use for. It is a good quality British bit of kit and is in good condition apart from a couple of marks on the table that does not affect its use in any way. It is heavy but can be lifted by one person,it would cost a fortune if bought new today. Collection only please due to weight .
Terms:
Price: £120.00
Collection Only
Contact:
Graham Gardner
Cheltenham
GL53
UK
01242 580548 + 07870900332
email

Thank You: Colchester Bantam Steady - Sold

Sat 15th Dec '18

Advert ID: 34322

Details:
Advert Number: 34184
Thank you for the interest and the administrators of this site.
Contact:
Ian Greaves

Scammers: daniella

Sat 15th Dec '18

Advert ID: 34321

Details:
Watch out someone after my grinder same old same old give me your address my secretary will send a cheque for more than you want and we can bla bla
why do they keep trying .LOL
Contact:
Name of Scammer: daniela
Scammers email: email

Wanted: 16mm Small S Clarkson Collet

Sat 15th Dec '18

Advert ID: 34320

Tools
See all ads from Bernard Wright
Details:
Hi Folks,

I'm looking for a 16mm Small 'S' Clarkson collet or two, I've lost the one I had in a workshop move recently.

I've looked on 'fleabay', but at the time there were only imperial ones on offer.

Any help from you folks on here would be appreciated.

Thanks for looking and for a great site.
Contact:
Bernard Wright
Scunthorpe
DN17
UK
07852880352
email

Wanted: Smart & Brown model A change wheels

Sat 15th Dec '18

Advert ID: 34319

Machines
Details:
Hello, does anyone have a set of metric change wheels for sale to fit a Smart & Brown model A lathe.
Contact:
Jack
Thurso
KW
UK
email


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: 4 -Model Engineering Books £20

Fri 14th Dec '18

Advert ID: 34318

Books/Magazines
Details:
Using the Small Lathe L.C.Mason
Lathe Accessories E.T.Westbury
Workshop Chatter M.Evans
Model Engineer's Handbook Tubal Cain

Total price for all 4 is £20.00 plus postage

All books are in excellent condition

Payment by Paypal
Terms:
Price: £20.00
Postage: £4.00
Post Only
Contact:
William Burns
Comber
BT23
UK
02891870808
email
4 -Model Engineering Books   £204 -Model Engineering Books   £204 -Model Engineering Books   £204 -Model Engineering Books   £20

Wanted: Castings and Drawings

Fri 14th Dec '18

Advert ID: 34317

Models
See all ads from Miles Campbell
Details:
Hello

Do you have any castings or drawings for sale?

Looking to plan the building list for 2019 and I'm considering...

Stationary Engines
  • Trojan
  • Warrior
  • Borderer
  • Marcher
  • Double Tangye
  • Stuart No.9

Others
  • Thomas - Pillar Tool
  • Tubal Cain - Gibraltar Tool Post
  • Lammas - Dividing Head, gear cutting, drill sharpening

Locomotive
Of course anything Green Arrow LNER V2

Thank you very much
Miles
Contact:
Miles
London
SE18
UK
email

Thank You: Airbrush compressor.

Fri 14th Dec '18

Advert ID: 34316

Details:
Advert Number: 34247
Could have sold twice over. Thanks to the admin for a great site.
Contact:
Derek Hughes

For Sale: 3 Axis CNC Router

Fri 14th Dec '18

Advert ID: 34315

CNC
See all ads from Rod Ashton
Details:
For Sale - Openbuilds “C” frame 3 axis CNC Router. In good clean condition. Completely enclosed cabinet 670 f/b 660 s/s 600 tall and fitted with cutting head dust extractor and vent for indoor use if required. Emergency stop button, thermometer. The correct DeWalt variable speed router is installed and all spanners and accessories included.
The unit can run on several control systems but is currently configured with Estlcam control + Estlcam CAM. Requiring only your 2/2.5 or 3D file to proceed through to finish cut.
The unit can be sold with or without the HP 3core laptop. Which is a simple USB connection. Happy to install software on your PC if you wish.
Will give demonstration and run through on the machine to purchaser.

The machine is £450 and the configured HP laptop if required is £150.
If you have any questions please ask. PM for pics
Terms:
Price: £450.00
Collection Only
Contact:
Rod Ashton
Waterlooville
PO8
UK
02392596906
email

Wanted: 30-40mm x 1.5-2mm wall Stainless tube/pipe

Fri 14th Dec '18

Advert ID: 34314

Materials
See all ads from Bernard Wright
Details:
Hi Folks,

I'm after about 1M of Stainless Tube/Pipe

30-40mm OD with a wall of 1.5-2mm.

Nothing really specific, as it's only to repair a narrow Stainless spade for the wife, I've tried local engineering works to no avail, (local to Sunny Scunthorpe)

Any help would be appreciated, can travel a fair distance in England to collect, (ride out for wife).

Thanks for looking and for a great site
Contact:
Bernard Wright
Scunthorpe
DN17
UK
07852880352
email

For Sale: grooving parting tool

Thu 13th Dec '18

Advert ID: 34313

Tools
See all ads from Pete Rimmer
Details:
Mitsubishi grooving and parting tool for sale. These are NOT normally suitable for a small home shop lathe (unless you want them for the inserts only and buy a cheap RH holder from eBay or something). It's 25mm shank and LH orientation which makes it more ideal for CNC lathes than normal ones so please check that you can use this before you decide to buy.

Have a look at the pic for the part numbers. There's a left hand tool shank, a LH insert holder and a box of ten inserts. Cromwell sell just the inserts on their own for £19.14 each. On eBay a box of ten will cost you £80 or so.

All of them are new and unused, just the boxes have a few dirty fingerprints.
Terms:
Price: £60.00
Postage: £5.00
Collection or Post
Contact:
Pete Rimmer
Gravesend
DA11
UK
email
grooving parting tool
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: 1/2HP Allspeeds variator

Thu 13th Dec '18

Advert ID: 34312

Machines
See all ads from Pete Rimmer
Details:
1/2HP Allspeeds variator for sale ideal for giving a small bench lathe a wide speed adjustment from a fixed speed motor. It's in very good condition and runs nicely without any nasty noises. The speed is adjusted by moving the lever from slow-fast whilst it is running.

The shafts both sides are 5/8", it's about 7" tall not including the speed lever and the maximum input speed is 980RPM. The output speed ranges from 1:3 to 3:1 so if for instance you drove the input shaft at 600RPM your output would be approx 200rpm-1600rpm.

Will come drained of oil so it doesn't run out of the breather in transit but with a pot of the correct Shell Morlina oil, enough to fill it with some top-ups.

Collect and pay cash or Paypal gift and I'll send it by Hermes.
Terms:
Price: £80.00
Postage: £10.00
Collection or Post
Contact:
Pete Rimmer
Gravesend
da11
UK
email
1/2HP Allspeeds variator1/2HP Allspeeds variator

For Sale: Excel 3 Ton Arbor Press

Thu 13th Dec '18

Advert ID: 34311

Tools
Details:
This press was bought by a gentleman who became ill soon after. It doesn't look like it has ever actually been used, there's not a mark on the base plate, anvil, or ram that I can see. There are some minor corrosion marks on the body where the paint has been scratched and a few other marks on the paintwork, but the ram and exposed steel are unblemished and have now been greased.
These are still sold by Excel and cost £342 plus delivery. It is made in Taiwan and weighs 67KG. It certainly looks and feels like a robust tool.
Ideally this is for collection only, though I may be able to deliver depending on where you live. This thing is heavy but will fit into any car boot, and I can load it for you if needs be.
Specs are:
Pressing capacity: 3 Ton
Press Height: 23.5"
Max. Work Height: 12"
Base Dimensions: 18" x 8"
Throat Depth: 6.5"
Weight: 67 Kg (near 150 lb)
Terms:
Price: £150.00
Collection or Delivery
Contact:
Stephen Murray
Prestatyn
LL18
UK
07917401007
email
Excel 3 Ton Arbor PressExcel 3 Ton Arbor PressExcel 3 Ton Arbor PressExcel 3 Ton Arbor Press

For Sale: Don Stothers ML7

Thu 13th Dec '18

Advert ID: 34310

Machines
See all ads from Adem Veli
Details:
This is the Late Don Stothers MyFord ML7 Lathe as such it is an unique opportunity to own a piece of history. Don was extremely well known in the model engineer world as both a extremely talented design engineer and as the founder and creator of the Jabberwock aircraft and Ratby Aeroplanes.

The Lathe comes complete with an additional powered cross feed with two tool posts.
It also has a full set of change gears, three and four jaw chuck.
I also have paperwork for the gear settings for speeds

I also have fixed steady and face plate available at additional cost.

Also has an original Dewhurts forward and reverse switch.

Lathe is wired on a work bench and will come as such.

Collection preferred but delivery can be arranged at an additional cost, full payment must be made for this to happen.
Terms:
Price: £1,300.00
Postage: Free
Collection Only
Contact:
Adem Veli
Leicester
LE6
UK
07929373526
email
Don Stothers ML7Don Stothers ML7

Wanted: Drummond Mk1 or Mk2 hand shaper or similar

Thu 13th Dec '18

Advert ID: 34308

Machines
Details:
Hiya I would love the hand shaper in what ever condition as long as it is restorable, ie not rusted through and has the body head plus table amd lead screws as a minimum, failing the drummond Id like to have a look at any equivelent hand shapers that anyone wants to sell, a hand winding table is a must and auto advance is prefered.

I have seen some like adept various sites and don't like the static beds, adding an x y milling style bed on top of the static bed would just take up too much height.
Contact:
Mark Hobster
Nottingham
NG10
UK
email

For Sale: sheet metal bender/folder

Wed 12th Dec '18

Advert ID: 34307

Tools
Details:
Sheet metal folder capacity 21" x 16swg mild steel or533.4x1.6mm in new money
good sturdy machine
Terms:
Price: £150.00
Postage: £9.00
Collection or Post
Contact:
David
Elgin
UK
email
sheet metal bender/foldersheet metal bender/foldersheet metal bender/folder

For Sale: viceroy sharpenedge grinder

Wed 12th Dec '18

Advert ID: 34306

Machines
See all ads from William Hawkins
Details:
single phase viceroy sharpenedge cylindrical grinder in good working condition any demo welcome reasonable footprint so does not take up valuable floor space collection Edmonton north London all assistance given for loading please note as this comes in two pieces it will easily go into a smallish vehicle
Terms:
Price: £185.00
Collection Only
Contact:
William Hawkins
london
n99a
UK
0208 292 9139
email
viceroy sharpenedge grinderviceroy sharpenedge grinder


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Shaublin 13 Milling Machine

Wed 12th Dec '18

Advert ID: 34300

Machines
Details:
Schaublin 13 Milling Machine

Weve owned this about 10 years, With my age and aches & pains its now time to downsize and sell most of the workshop contents, a sad day.
This miller as never been abused,
this last 3 year I dont think Ive used more than an hour or two per year.

A bit dusty,
The makers plate says "YEAR 1956"
Acquired this of another model engineer

The machine comes with a Schaublin High-Speed vertical head (speeds from 170 to 6400 rpm), but NO Collets (E20)

It as the original forward and reverse switch.

It has the tilting/swivelling table fitted.

The leadscrews imperial

its fitted with DRO on XYZ and was working perfectly when I last used it, but the batteries are flat on the "Hand held Tablet PC" (for the read out) so cant test it at the moment

Its a 30 international taper.

Comes with one Clarkson Autolock chuck with 2 sets of collets, English & Metric
1/4". 3/8", 1/2", 5/8"
6mm, 10mm, 12mm, 16mm,

Its a 3 phase machine that comes with a Mitsubishi phase converter, so it works of a domestic supply (13 amp plug).

Can be seen running and working, basically its a nice machine,
the table as a small mark or two

More photos on request

The price is "or near offer"

Phone for more info,
Blocked or private will be ignored

Thank you
Regards Ted

PS.
You can send your own courier if that helps

We have a forklift to assist in loading to a suitable vehicle or trailer.
Terms:
Price: £2,000.00
Collection Only
Contact:
Ted Silcock
Golborne.
WA3
UK
07802 635506
email
Shaublin 13 Milling MachineShaublin 13 Milling MachineShaublin 13 Milling MachineShaublin 13 Milling Machine

For Sale: Geeetech M201 3D printer + bits

Wed 12th Dec '18

Advert ID: 34305

Machines
See all ads from Youra Turceninoff
Details:
An assembled and improved Geeetech M201 3D printer and some filament and other spares.

I bought this two-colour filament extruder printer some time ago, and have made a couple of improvements, in particular the vital bearing support of the Z-Axis leadscrews (see pictures) and a lot of other general fettling.

I barely use it though, as other things are taking time in the workshop and around the house, so I think it's time to move it along and let someone else have a play :-)

I'm including three reels of filament and most of the parts to convert it to a more standard setup (Arduino controller and RAMPS 1.4 board). Examples of parts made on this machine are in the pictures.

Current price for unassembled machine alone around £170 + shipping.

Collection only please from Stockport.
Terms:
Price: £150.00
Collection Only
Contact:
Youra Turceninoff
Stockport
SK73
UK
07748766446
Geeetech M201 3D printer + bitsGeeetech M201 3D printer + bitsGeeetech M201 3D printer + bitsGeeetech M201 3D printer + bits

For Sale: Mill /Drill

Wed 12th Dec '18

Advert ID: 34301

Machines
Details:
Mill/Drill Warco MD30Nvariable speed with inverter to motor and 3 pulleys to give rough speed Table 26"x7.25" with no marks variable speed feed to X axis and coolant system added on custom built stand with adjustable feet. the stand can be removed to fit in an estate car(large)
Terms:
Price: £600.00
Collection Only
Contact:
David Munro
Elgin
IV30
UK
email
Mill /DrillMill /DrillMill /DrillMill /Drill

Information: Plasma cutting

Tue 11th Dec '18

Advert ID: 34298

Tools
See all ads from Michael Whittingham
Details:
Hi. Considering buying a plasma cutter to assist in making weather vane cut outs. No knowledge of the machines so any advice on the pro's and con's would be appreciated.
How clean is the cut, is a pilot arc a good idea? Should I opt for a bigger unit than I need to allow for more work?

Best regards Mick
Contact:
Michael Whittingham
UK
email

For Sale: Compound Slide

Tue 11th Dec '18

Advert ID: 34297

Tools
Details:
Selling on behalf of a Widow friend
Compound slide as photos.
Buyer to collect due to weight.

Make an offer say £20
Terms:
Price: £20.00
Collection Only
Contact:
Geoff
Wigan
WN5
UK
01695624411
email
Compound SlideCompound Slide

For Sale: Pllastow A7 2" showman traction engine

Tue 11th Dec '18

Advert ID: 34294

Models
Details:
Part built 2" A7 Plastow traction engine 'Princes'. Still a lot to do but includes completed front and rear wheel, hornplates, bronze bearings, from axle etc.
Everything you see in pics is included in the sale plus set of drawings. As you wlll see, the main bearings and crankshaft assembly are complete. most of the gears are present and some are machined. The boiler is stamper 'MJ along with a serial NO. but there is no paperwork and the boiler is a hydraulic failure. Unfortunatly it was not sold to me with that truth. You will also see that the dynamo castings and brackets are present.
Terms:
Price: £875.00
Collection Only
Contact:
Alan
Exeter
ex9
UK
01395446678
email
Pllastow A7 2" showman traction enginePllastow A7 2" showman traction enginePllastow A7 2" showman traction enginePllastow A7 2" showman traction engine
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Information: China Topper Forged Valve Manufacturer Co., Ltd.

Tue 11th Dec '18

Advert ID: 34293

Machines
Details:
Topper Forged Valve Company, established in 1988, specializes in the manufacture of forged steel valves. Products of Topper Company include forged steel ball vales, forged steel check valves, forged steel gate valves, forged steel globe valves, forged integral flanged valves and forged steel strainers with various features and functions. We cultivate a great team concentrating on forged steel valve manufacture and obtain a great reputation from our customers since we have reliable forged steel valve products with the most competitive prices. We have long-term friendship and partnership with our customers based on our forged steel valves with high standards and stringent quality control systems. Our products serve customers from 40 countries, including USA, UK, Germany, Italy, Iran and Singapore. Through a variety of excellent working performance, our forged steel valves are proved that they can help to not only save your money, but also simplify your working life. Please visit our website for more information: http://www.valvesforged.com.
Contact:
Jeawin
UK
http://www.valvesforged.com/
China Topper Forged Valve Manufacturer Co., Ltd.China Topper Forged Valve Manufacturer Co., Ltd.China Topper Forged Valve Manufacturer Co., Ltd.China Topper Forged Valve Manufacturer Co., Ltd.

For Sale: pneumatic stuff

Mon 10th Dec '18

Advert ID: 34292

Materials
Details:
total of 7 cylinders ranging from32mm dia x200 mm long to 12mm dia x 80 long also pile of connectors for 3,4& 5mm dia hose see photo for details and some brass valves flow well 1 way adjust the other, qty 1 pressure regulator and qty 2 gauges0-12 bar please see pictures 12" rule is only there for scale (not included)
Terms:
Price: £50.00
Postage: Free
Collection or Post
Contact:
David
Elgin
IV30
UK
email
pneumatic stuffpneumatic stuffpneumatic stuffpneumatic stuff

For Sale: Model Enginneer

Mon 10th Dec '18

Advert ID: 34291

Books/Magazines
Details:
It may be someone could be interested in these. We have over 1000 magazines no longer required and proceeds go towards a charity museum.
Would be prepared to sell these in whole volumes at £5 per volume with postage at cost.List available of volumes 102(April 1950) to 148(January 1982).
Terms:
Price: £1.00
Collection or Delivery
Contact:
Phil Waddingham
Sheffield
S6 1
UK
07340814722
email

Wanted: bleed cup

Mon 10th Dec '18

Advert ID: 34290

Machines
Details:
wanted a bleed cup for a vari-matic watch cleaning machine or any picture’s with measurements to make one please if you have one come back with price thanks steve
Contact:
steve
durham
sr7
UK
01915264987
email

Wanted: Vertical metal Bandsaw

Mon 10th Dec '18

Advert ID: 34289

Machines
See all ads from Michael Whittingham
Details:
Hi all, im looking for a 14 inch vertical bandsaw for cutting steel, possibly a startrite 10 speed if possible. Not a problem if three phase, based near Sheffield so hopefully not too far would be a bonus.
Best regards Mick
Contact:
Michael Whittingham
BARNSLEY
S73
UK
email

For Sale: Duplex D29 toolpost grinder. Very clean.

Mon 10th Dec '18

Advert ID: 34288

Machines
Details:
Hi All,

I bought this TP grinder a couple of years ago with every intention of mounting it on my Colchester and... I'm just not going to get round to it.

The poor thing has just sat in the cupboard. Which is strangely where it was when I bought it. In a cupboard.

I doubt it's had much use ever going by its condition and it's certainly the cleanest Duplex grinder I've seen.

It's big and it's heavy. The book says 25kg. You'd need something at least as large as a Student to mount it.

Takes 6" wheels, has 4 speeds (4500, 7000, 8000, 12000). It's a 3ph machine but could easily be converted to 240V using a £50 VFD off of Ebay.


Price £495. Would prefer pick up if possible but delivery could be arranged.

Courier delivery, £12, mainland UK.

Cheers,

Wilson.
Terms:
Price: £495.00
Postage: £12.00
Collection, Delivery or Post
Contact:
Wilson Logan
Paisley
PA1
UK
07711026653
email
Duplex D29 toolpost grinder. Very clean.Duplex D29 toolpost grinder. Very clean.Duplex D29 toolpost grinder. Very clean.Duplex D29 toolpost grinder. Very clean.


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

Wanted: Drawings

Sun 9th Dec '18

Advert ID: 34286

Models
Details:
Hi, I know this is a long shot but does anyone have a set of drawings by G K King of the
Fieldhouse winding engine that they no longer require as I am interested in building the model
Contact:
Brian Hand
Shrewsbury
Sy4
UK
01952771500
email

For Sale: Sweet Pea Firebox

Sat 8th Dec '18

Advert ID: 34283

Models
Details:
Sweet Pea Firebox, all stainless apart from the ceramic sealant. Firebars and box are 316 stainless, all the rest is 304. Firebars are 5mm wide x 12mm deep.

The unit has a proper enclosed ashpan, all the air enters through the damper door. Top air is directed between the outer and inner front plates keeping them cooler and preheating the top air. There is also an arch directing the gases partially down the side of the firebox thus significantly increasing the effective heating are of the boiler firehole. I have seen this on the other unit I have fitted to my Sweet Pea.

To get the best from this firebox it is essential to make a good fit between the front plate and the boiler tube to prevent cold air entering.

This unit is new and unused.

Post will be by tracked service.
Terms:
Price: £300.00
Postage: £15.00
Collection or Post
Contact:
David B
Alton
GU34
UK
email
Sweet Pea FireboxSweet Pea FireboxSweet Pea FireboxSweet Pea Firebox

For Sale: Small Brazing Hearth

Fri 7th Dec '18

Advert ID: 34280

Tools
Details:
It does what is says on the tin!

A very useful small brazing hearth. There is a small amount of damage to two of the bricks.

Dimensions are in the pictures.
Terms:
Price: £35.00
Collection Only
Contact:
Peter Sheppard
Trowbridge
BA14
UK
email
Small Brazing HearthSmall Brazing HearthSmall Brazing Hearth

Wanted: Deckel KF Brochures

Fri 7th Dec '18

Advert ID: 34279

Books/Magazines
Details:
Deckel KF literature showing the Medallion Attachment.
Contact:
Lloyd Williams
Stoke Poges
Sl2
UK
01753 662285
email

Information: Conect CNC lathe upgrade

Fri 7th Dec '18

Advert ID: 34278

CNC
Details:
Some years ago I bought a bench top conect CNC lathe (white and blue ML10 based) and now I would like to get it up and running. I'm assuming the best approach is to put new in new steppers and drives, an AC spindle motor with inverter speed control (or keep the DC motor but with a new speed controller), new power supply and some sort of breakout board so I can use Mach 3 to run it.

Has anyone on here upgraded one of these before and have an idea what parts to use? Particularly which stepper motors to use.

Many thanks
Contact:
Andrew
UK
email

For Sale: Surface Plate

Fri 7th Dec '18

Advert ID: 34277

Tools
Details:
18" square surface plate with wooden top.

Its a bit beat up but its better than me putting it in the skip for the scrap man.
Terms:
Price: £10.00
Collection Only
Contact:
Staurt
Derby
DE1
UK
07970352591
email
Surface Plate
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: SikaBoard Patten making

Fri 7th Dec '18

Advert ID: 34276

Materials
Details:
SikaBoard is mostly used for making Pattens and moulds.

Machines very easy but can be as strong as metal.

3 different grades/hardness all 250x250x50mm
Terms:
Price: £30.00
Postage: £12.00
Collection or Post
Contact:
Stuart
Derby
DE1
UK
07970352591
email
SikaBoard Patten making

Information: JB Loco Lifting Table

Fri 7th Dec '18

Advert ID: 34274

Tools
See all ads from Geoff Johnson
Details:
Do any of our happy readers possess a JB Loco lifting table?
I need a bit of help in finding the right trolley jack. I obtained my table already built via this fine site .
It works fine, but the minimum height of jack I'm using doesn't allow the lift to come down cleanly to its lowest level.
Was there any advice on jacks in the original instructions, or perhaps variations in the drawings for different jacks?
I'd be very pleased if an existing owner could contact me via phone or email
The firm that used to supply them in Wrexham, appears to be no longer in business.
Contact:
Geoff Johnson
UK
01829 760422
email

For Sale: Myford Super 7B with some tooling

Thu 6th Dec '18

Advert ID: 34270

Machines
Details:
Older style Myford Super 7 with headstock oil reservoir and imperial gearbox. Obviously used but in good general condition but could do with some fettling. It’s done all I’ve ever asked of it in the 12 years or so I’ve been the custodian though I never got around to fitting a 3 phase motor and inverter.

Offered with the following:
Manufacturers stand with Dewhurst reversing switch
Riser blocks
4 Jaw burnard independent Chuck and key
3 Jaw burnard scroll chuck with reverse jaws and key
Face plate
Driving plate
1/8, 3/16, 1/4, 3/8, 1/2” collets
Collet nose piece and fitting tools
Myford fixed steady
Third party unused travelling steady
2MT RunnIng Centre
2MT Hand close drilling chuck
Myford multi angle milling slide

For collection from Gosport near Portsmouth Hampshire only, I can assist with loading but have no lift equipment.
Cash or cleared bank transfer only prior to collection. No other means of payment will be considered
Terms:
Price: £2,300.00
Collection Only
Contact:
Alan Alborough
Gosport
PO13
UK
email
Myford Super 7B with some toolingMyford Super 7B with some toolingMyford Super 7B with some toolingMyford Super 7B with some tooling

For Sale: Clamping kit Warco 9550 (9549)

Thu 6th Dec '18

Advert ID: 34269

Tools
Details:
Clamping kit for Warco 3" rotary table and maybe 4". The box has code no. 9549 and 9550, the latter seems to be a current number. Note this kit has 2 M6 bolts 24mm lg, not studs. New but very slight staining from storage and box is scruffy. The "T" nut is 1/2" wide.
Price includes postage UK mainland, £1.50 less if you wish to collect from Chelmsford
Terms:
Price: £7.50
Postage: Free
Collection or Post
Contact:
John Knight
Chelmsford
CM2
UK
email
Clamping kit Warco 9550 (9549)

For Sale: Parker Double Acting Air Cylinder

Thu 6th Dec '18

Advert ID: 34268

General
Details:
This Parker double acting air cylinder is used but in good condition.
Parker P1E-T063MS-0160
Max pressure 10 Bar.
63mm bore x 160mm stroke
Damped end strokes.
3/8 bsp thread.
Cost about £75 new.
Price £25

Collect, or I can post for £12.50
Weight 3.2 KG
Terms:
Price: £25.00
Postage: £12.50
Collection or Post
Contact:
Richard Chadwick
Nottingham
NG21
UK
07967364447
email
Parker Double Acting Air CylinderParker Double Acting Air CylinderParker Double Acting Air CylinderParker Double Acting Air Cylinder

For Sale: Neodymium Magnets. 6mm Dia x 4mm thick. N42

Wed 5th Dec '18

Advert ID: 34266

General
See all ads from Richard Chadwick
Details:
I have a large quantity of these very strong magnets to sell.
New and unused, Left over from a production run.

6mm diameter x 4mm thick. Grade N42

These can be used for all sorts of projects from Fridge magnets to serious scientific projects.

Priced at £9.50 per 100.
Inclusive of P+P
2nd Class post

I could offer a better price for lots over 500 off.
Terms:
Price: £9.50
Postage: Free
Post Only
Contact:
Richard Chadwick
Nottingham
NG15
UK
07967 364447
Neodymium Magnets. 6mm Dia  x  4mm thick. N42Neodymium Magnets. 6mm Dia  x  4mm thick. N42


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: Copper tube

Wed 5th Dec '18

Advert ID: 34264

Materials
Details:
Copper tube

Three lengths:

Approximate dimensions:

1. 24" x 4" x 2.1 mm
2. 28" x 6" x 3.4 mm
3. 29" x 3" x 1.2 mm

Sensible offers welcome.

Collection only.
Terms:
Price: £0.01
Collection Only
Contact:
Mark
Nr. Dorking
KT23
UK
email
Copper tubeCopper tubeCopper tube

For Sale: 3 1/2" Gauge P V Baker Locomotive

Wed 5th Dec '18

Advert ID: 34263

Models
Details:
31/2" Gauge P V Baker Locomotive

Dismantled locomotive. Chassis runs on air. Motion work turns over freely. Belpaire boiler does have an expired test certificate but the number on the certificate is not stamped on the boiler. The boiler has one clack valve. One picture shows the locomotive before disassembly. Average build. Drawings included.

Pretty much complete locomotive, things like pipework, steam fittings, ash pan and grate, and other minor work required to finish. Really needs to be repainted whilst disassembled. A nice Winter project.

Viewing welcome.

Collection welcome or can deliver or meet up within a 100 mile radius of London for pretty much petrol costs.

More photographs available.
Terms:
Price: £495.00
Postage: £35.00
Collection, Delivery or Post
Contact:
Mark
Nr. Dorking
KT23
UK
email
3 1/2" Gauge P V Baker Locomotive3 1/2" Gauge P V Baker Locomotive3 1/2" Gauge P V Baker Locomotive3 1/2" Gauge P V Baker Locomotive

For Sale: 2" Clayton Model Engineer Magazines

Tue 4th Dec '18

Advert ID: 34262

Books/Magazines
Details:
2" Clayton construction notes and drawings in Model Engineer magazines.

10 magazines in nice condition.
Terms:
Price: £9.50
Postage: £4.00
Collection, Delivery or Post
Contact:
Mark
Nr. Dorking
UK
email
2" Clayton Model Engineer Magazines

For Sale: Buffer Beam Detail Kit for 5" Gauge Diesel Locomotives

Tue 4th Dec '18

Advert ID: 34259

General
Details:
Buffer Beam Detail Kit for 5" Gauge Diesel Locomotives

Almost brand new, not used.

Consisting of:

3 x Air brake valves, pipes & connectors
2 x Air Control valves & pipes
Blue star electrical jumpers
Rubber hoses included.
Lost wax cast in brass and threaded or drilled, simply drill your buffer beam to suit, and add screws/nuts.

Note: Threads are cast into fitting spigots but may need a die running down them before attaching. Backs of larger pieces will need tapping before fitting.

http://17d-miniatures.co.uk/store/locomotive-parts/buffer-beam-detail-kit-5-inch

Excellent quality.
Terms:
Price: £22.00
Postage: £5.00
Collection or Delivery
Contact:
Mark
Nr. Dorking
KT23
UK
email
Buffer Beam Detail Kit for 5" Gauge Diesel LocomotivesBuffer Beam Detail Kit for 5" Gauge Diesel LocomotivesBuffer Beam Detail Kit for 5" Gauge Diesel LocomotivesBuffer Beam Detail Kit for 5" Gauge Diesel Locomotives

Wanted: Brierley ZB25 Drill Grinder Accessories

Tue 4th Dec '18

Advert ID: 34258

Tools
Details:
I Have a Brierley ZB25 Drill Grinder with some basic cams, and now would like to venture into point splitting etc. So if you have any extra cams, LH RH point splitting etc please let me know. All other accessories also considered.
Contact:
Scott Gray
Cupar
KY15
UK
email

For Sale: Broken Screw Extractors

Mon 3rd Dec '18

Advert ID: 34253

Tools
See all ads from Phil Waddingham
Details:
No1 to No6 Screw extractors with correct sized left hand drills. Complete with original metal index box. Using the left hand drill can on occasions remove the broken screw without resorting to the extractor.
Collection preferred but will post at cost
Terms:
Price: £22.00
Postage: £4.00
Collection or Delivery
Contact:
Phil Waddingham
Sheffield
S6 1
UK
07340814722
email
Broken Screw ExtractorsBroken Screw Extractors
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Jurassic Tools here:-- https://www.jurassictools.com/ Selling small Engineering tools to Modelmakers and Engineers alike. Drills, taps, spindle tooling, Carbide inserts, Collets, milling and turning tools, carbide and HSS cutters and lots more, take a look. Several thousand items available. Hope you find something of interest.
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

Information: Est Ticino Diatac 40 milling machine.

Mon 3rd Dec '18

Advert ID: 34252

Machines
Details:
Hello all,

I’m looking for information and hopefully a manual for the EST Ticino Diatac 40 universal mill.

It is Italian made and very much like a Deckel FP2. I have searched high and low across the internet for information but have found little.

I could really use a manual, hopefully with a wiring diagram as I’m having issue with the power feed and rapid traverse.

Many thanks.
Contact:
Joe
UK
07791 580 721
email

Wanted: Spares for S2/T2 toolholders

Mon 3rd Dec '18

Advert ID: 34250

Tools
Details:
I am looking for 1 spare clamp bolt and 1 spare clamp pad for a Bison S2/T2 tool post. Also any toolholders would be of interest too. Thanks.
Contact:
M Wright
Aberdeen
UK
email

For Sale: Vintage Van / Car heater.

Mon 3rd Dec '18

Advert ID: 34248

General
Details:
A very old but never used, still in the original box it came in, van or car heater. I feel sure there must be folk on this wonderful site who love restoring old cars and vans. If so then this is a VERY rare chance to buy an original heater. The instructions say it is for a 5cwt Morris van, but I am sure it could easily be fitted to almost any vehicle. I am selling this for the widow of an old friend, (see my other ad), so the price is fixed. Cash on collection only.
Terms:
Price: £40.00
Collection Only
Contact:
Derek Hughes
Crewe, Cheshire.
CW1
UK
annderek@uwclub.net
email
Vintage Van / Car heater.

Wanted: model engineer (articles or mags)

Mon 3rd Dec '18

Advert ID: 34246

Books/Magazines
Details:
I am looking for a few articles or the magazines (Model Engineer) from late 1977-early 1978 on the Ransome Sims an Jeffries Light Compound tractor, I am looking for parts 5,6,8,10,11,reasonable price paid for the magazines or photo-copies
Contact:
David Bothwell
HALIFAX
HX1
UK
01422256969
email

For Sale: Startrite 18 T 10 Vertical Metal Cutting Bandsaw

Mon 3rd Dec '18

Advert ID: 34245

Tools
Details:
Startrite Model 18 T 10 Metal Cutting
3 Wheel Bandsaw
19" x 19" Tilting Table
18" Throat x 10" Depth of Cut
10 Speed Belt Drive (with back gear)
Blade Size 114"
3 Phase Motor Fitted

www.bedetools.com

Can be Secured to a Pallet for Delivery to your Door by Tail Lift Wagon , Please Supply a Post Code if You Require a Pallet Price
Terms:
Price: £750.00
Collection or Delivery
Contact:
Trader
Bede Tools and Machinery
Jarrow , Tyne and Wear
UK
0191 4286575 - 07966285390
email
Startrite 18 T 10 Vertical Metal Cutting BandsawStartrite 18 T 10 Vertical Metal Cutting BandsawStartrite 18 T 10 Vertical Metal Cutting BandsawStartrite 18 T 10 Vertical Metal Cutting Bandsaw

For Sale: HSS / BSW split dies

Mon 3rd Dec '18

Advert ID: 34244

Tools
Details:
Presto brand, 1" diam, 5/16" 1/4" and 3/8"all new/unused and in the maker's original boxes plus a new/unused made in England 3/4" diameter x 7/32" BSW. The price includes p&p.Only being sold as one lot.
Terms:
Price: £15.00
Postage: Free
Post Only
Contact:
Eddie Martin
Broxburn
EH52
UK
email


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
I am the grim reaper I will clear your home workshop for cash and sweep up on the way out,after drinking your tea.
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

Wanted: Lorch Collets

Sun 2nd Dec '18

Advert ID: 34066

Machines
Details:
I am after some Lorch Model A collets, the ones with a 10mm diameter shank, to fill in the gaps in my set. If you have any Lorch Model A collets in good condition that you are willing to part with please contact me preferably by email or text initally.
Contact:
Jon' Lorton
Chippenham, Wiltshire
SN15
UK
07952 963557
email

For Sale: Moore & Wright 11" - 12" micrometer.

Sun 2nd Dec '18

Advert ID: 34239

Tools
Details:
Moore & Wright 11" - 12" micrometer.
In original box with standard, in excellent condition.
Collection or post via Hermes at £6.00
Terms:
Price: £15.00
Postage: £6.00
Collection or Post
Contact:
John Bennett
Hatfield
AL10
UK
email
Moore & Wright 11" - 12" micrometer.Moore & Wright 11" - 12" micrometer.Moore & Wright 11" - 12" micrometer.

Wanted: Smart and brown gears

Sun 2nd Dec '18

Advert ID: 34238

Machines
Details:
Hi all
I'm in need a a 48 toothed gear/change wheel for a smart and brown model A lathe.
Thanks
Steve
Contact:
Steve
Hull
Hu11
UK
email

Wanted: divider for myford ml7

Sat 1st Dec '18

Advert ID: 34237

Tools
See all ads from Leandro Temporin
Details:
I am looking for myford ml7 lathe divider in good condition, complete with all disc-dividers.
Contact:
Leandro Temporin
Sant'urbano
35
Italy
+39 3775069985
email

Wanted: I off pairshaper hold downs

Sat 1st Dec '18

Advert ID: 34233

Tools
Details:
Starret 6 or 4 inch length shaper hold downs for use in shaping or milling machine vice. Not many of these items around these days. Could be lurking under a work bench somewhere.
Thank you B.Reilly
Contact:
Bernard Reilly
Glasgow
G69
UK
0141 779 4473
email

For Sale: 24V C. A. V. Alternator

Sat 1st Dec '18

Advert ID: 34232

General
See all ads from Peter Bowers
Details:
24V alternator with 6" dia. pulley on 5/8" shaft. 9" overall length x 7.5" overall width. Spade terminals marked +, -, F, A.

Markings:
AC5B 24-56
DESP No. 1263B317
24V 38-78
AS68 6 R80G
C.A.V.

Looks to be in good working order. Available for collection from either Southampton or Windsor, alternatively can be posted for cost.
Terms:
Price: £25.00
Collection or Post
Contact:
Peter Bowers
Windsor
SL5
UK
07799 294196
email
24V C. A. V. Alternator24V C. A. V. Alternator24V C. A. V. Alternator24V C. A. V. Alternator


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.